Allenbuilt

Working on some new race ports

2011-06-06T06:50:00.001-07:00

I am working on some new race ports for the F20c engines. As you can see from the comparison they are pretty big. These are for the race cars looking for maximum hp.

Got in some more S2000 billet blanks

2011-05-27T07:07:00.001-07:00

Just got in another batch of full round F20C cam cores

New Piston design

2011-05-27T07:04:00.001-07:00

I have been working on a new piston design and was able to come out at 260g in a 90mm bore with a large dome.

B-series action

2011-05-18T07:13:00.001-07:00

I have been working on a cylinder head for a sponsored turbo race car. It is running very high lift Web Cams and we were able to squeeze in some oversize valves as well.

Spring Nationals

2011-05-04T08:07:00.000-07:00

Here are some videos from the weekend

Tim vs. Jake Qualifying http://www.grs-motorsports.net/videos2011/usa/etown/spring2011/3.wmv

Semi-Finals http://www.grs-motorsports.net/videos2011/usa/etown/spring2011/58.wmv

Finals http://www.grs-motorsports.net/videos2011/usa/etown/spring2011/38.wmv

Congratulations to Tim

2011-05-03T08:56:00.001-07:00

Tim was the number 1 qualifier and won Spring Nationals at Englishtown this past weekend with a 10.30@134 in the Finals. Congrats!

Congrat's Tim and Jake

2011-04-19T15:13:00.001-07:00

Congratulations to Tim and Jake for an awesome final at Honda Day this past weekend. Here is a video

http://www.youtube.com/watch?v=2u7bPFP_Ffo&feature=player_embedded

Can't get any closer than that!!!

Race season is starting early

2011-01-14T11:12:00.001-08:00

Shipped out Marc P's motor this week for a race this weekend. Good luck!

B-series sleeve week

2010-12-23T06:47:00.001-08:00

Revival of the b motor. 3 on the floor and 1 in the machine

Went to PRI this year

2010-12-23T06:44:00.001-08:00

Unfortunately, it was cold in Orlando and we didn't come home with any new toys but it was still a fun show

ITB testing on Jake's set up

2010-11-04T04:57:00.001-07:00

S2000 billet cams

2010-10-08T12:10:00.001-07:00

I have been working on trying to get billet cams done for the S2000 turbo and street all motor cars. I got a couple profiles to try out. The hard thing is trying to get them to fit with the large factory valves. This profile fits. Hp numbers coming soon....

2010-10-02T08:30:00.001-07:00

Getting ready for some shootout action

2010-10-02T08:29:00.000-07:00

K-mania

2010-09-15T09:17:00.000-07:00

September must be the month of K-series. Lots of blocks to sleeve.

Video of Jake in the Finals NSCRA July 25

2010-07-28T10:31:00.001-07:00

http://www.grs-motorsports.com/notic...25julio/10.wmv

Jake wins MIR NSCRA July 25th event

2010-07-26T07:16:00.001-07:00

It was a hot one this weekend. Jake qualified #2 with a 10.94/125mph. Unfortunately, Tim was having some transmission issues and didn't qualify high in the ladder so they had to race first round. Jake had Cheryl 2nd round and Pepsi in the finals. He was able to tree him to get the win. His best this weekend was a 10.88/126mph

Congratulations Jake!

Jake runs 10.80 in test and tune

2010-07-23T10:51:00.001-07:00

Jake went to the Thursday night test and tune and ran 10.80@127

60' -1.598
330' - 4.541
1/8 -6.959
mph -101.52
1000' -9.041
1/4 -10.805
mph -127.20

Old school!

2010-07-15T18:58:00.000-07:00

This my old truck from about 10 years ago when I was mini-truckin. My buddy Ben just picked it up.

Video's of Tim

2010-06-30T08:21:00.001-07:00

Here are some videos of Tim running at Summer Slam

Semis finals vs. Loan

http://www.grs-motorsports.com/noticias/2010/videos/etown/0626/136.wmv

Finals vs. Pepsi(where he red lights)

http://www.grs-motorsports.com/noticias/2010/videos/etown/0626/150.wmv

Video Nyce1s.com made of me at the MIR NSCRA race :

http://www.youtube.com/watch?v=VWa3HQ1Zd8s

Congratulations to Tim! Winning Summer Slam@ Englishtown 6/27/10

2010-06-28T08:56:00.001-07:00

It was a tough battle this weekend but Tim prevailed. He ran a best time of 10.57@130mph

Video of Tim in the NSCRA

2010-06-15T13:49:00.001-07:00

Tim vs Loan NSCRA Finals June 13, 2010 MIR

http://www.grs-motorsports.com/noticias/foro/videos/usa/nscra2010/13junio/22.wmv

Congratulations to Tim

2010-06-15T10:08:00.000-07:00

Congratulations to Tim Grey for winning the MIR NSCRA event this weekend!!!!!

Guess who's building your engine

2010-06-08T18:50:00.000-07:00

Christmas came early. Thanks John!!!!!

2010-05-28T04:11:00.001-07:00

2010-04-24T08:58:00.001-07:00

This is the highest horsepower naturally aspirated F20c engine. We
will be working on further development for additional hp in the engine
and induction systems. The engine is producing in the 380-390
flywheel hp on E85. Within this season we should be able to raise it
into the 400-410 flywheel hp range.

Shot of the intake port and piston

2010-04-24T08:48:00.000-07:00

Degreeing the camshafts

2010-04-24T08:47:00.001-07:00

Custom billet cam set

2010-04-24T08:45:00.000-07:00

2010-04-24T08:11:00.001-07:00

2010-04-24T08:11:00.000-07:00

Intake port

2010-04-24T08:10:00.000-07:00

Exhaust ports

2010-04-24T08:09:00.000-07:00

Just material out of the intake ports!

2010-04-24T08:08:00.000-07:00

2010-04-24T08:07:00.000-07:00

Porting

2010-04-24T08:06:00.000-07:00

You can see how much the the port has to be opened up for the larger
size valves.

Installed oversize valve seats

2010-04-24T08:05:00.001-07:00

I have been using nickel-bronze seats on the race car heads with good
results.

Working on Jake's engine

2010-04-24T08:01:00.000-07:00

Marc Wins first IFO of 2010

2010-01-28T08:05:00.001-08:00

First race of the year IFO in Gainesville. Went 10.93@123 in finals and high 10's all day. Congratulations

New Employee

2010-01-06T08:49:00.001-08:00

Hudson William Allen was born on December 15 to parents Jeremy & Rachel!

Mark Reis 10.58 pass at MIR World Cup finals

2009-11-17T07:44:00.000-08:00

Mark Reis 10.58

Videos From the All Motor Shootout

2009-10-13T07:42:00.000-07:00

First round: Tim Grey Vs y Henryguez
http://www.grs-motorsports.com/noticias/foro/videos/etown/fall2009/78.wmv

2nd round: Tim Grey Vs Cheryl McCullough
http://www.grs-motorsports.com/noticias/foro/videos/etown/fall2009/48.wmv

Semi Finals: Tim Grey Vs M Podkowik
http://www.grs-motorsports.com/noticias/foro/videos/etown/fall2009/33.wmv

Finals
http://www.grs-motorsports.com/noticias/foro/videos/etown/fall2009/17.wmv

2009-10-05T07:27:00.001-07:00

Congratulations to Tim Grey for winning the All Motor Outlaw shootout
this weekend. Heard it was an awesome event. Sounds like everybody
had a good time. Mat went 9.00@169mph. Very good for a car with very
little track time!

Sent from my iPhone

Camshaft calculator

2009-09-21T09:24:00.001-07:00

I have been working on this for myself and tuners that recieve some of the super high hp all motor engines which require cam movement with super tight clearances. This way I can give a minimum cam seperation and this will calculate exactly how far you can move everything and what it will do.

Camshaft Calculator

Finishing up on Steve's B18c

2009-09-18T07:14:00.001-07:00

Tim's car in the October Dsport magazine

2009-09-10T15:03:00.000-07:00

http://www.dragsport.com/issue/2009/1009_feat_article.shtml

Finishing up on the F20 sleeve job

2009-09-10T14:52:00.000-07:00

Another day another block

2009-09-10T07:42:00.000-07:00

Cutting out an F20 block for a customer

After

2009-09-08T09:17:00.001-07:00

2009-09-07T13:07:00.002-07:00

Working on port matching a customers Xcessive intake manifold

2009-09-07T13:07:00.001-07:00

Before

Pricing for engine services

2009-09-05T16:06:00.000-07:00

Block Sleeving

B Series	$1275
D Series	$1275
F Series	$1275
H Series	$1275
K Series	$1275

*AEBS closed deck sleeves are used
*Prices are with customer supplied cores

Allenbuilt Signature Short Blocks(includes AEBS
sleeves/without sleeving subtract $1275)

B Series	$3495
F Series	$3995
H Series	$3995
K Series	$3995

*Prices are with customer supplied cores

Allenbuilt Signature Cylinder Heads

Performance Valve Job	$995
Hand Ported Cylinder Head *performance valve job included	$1595
CNC Ported Cylinder Head *performance valve job included	$1995
Valve Guide Installation *price includes bronze valve guides	$250

*Prices are with customer supplied cores
*All prices include hot tank, glass bead, and assembly

Machine Shop Services

Hot Tank Block	$50
Hone Block*	$150
Bore .020 Over	$150
Bore Custom Size*	$300
O-Ring Block	$250

*Customer must supply neccassary components for proper measurements

Engine Building Services

Short Block Assembly *blueprint, balance, assembly	$1250
Long Block Assembly Turbo *degree in long block assembly	$650
Long Block Assembly NA *degree in long block assembly	$950

New all motor RACE ONLY K20 camshafts!!!

2009-09-05T11:16:00.001-07:00

These are some new custom cams we will be testing shortly. Stay tuned
for the results

Mark Reis's car on the dyno

2009-09-05T09:16:00.000-07:00

Tom's S2000

2009-09-05T06:05:00.001-07:00

2009-09-04T18:10:00.001-07:00

Allenbuilt Blog under Construction!!!

2009-09-04T17:23:00.001-07:00

Allenbuilt Blog under Construction!!!